SafeVPN PPTP, no encryption, tutorial for MAC OS X 10.5/10.6/10.7

This PTPP setup example fully compatible with MAC OS X 10.5, 10.6 and 10.7

This setup example for PPTP connection without encryption.

step 1

Start from System Preferences…

Mac OS 10.5/10.6/10.7 PPTP setup example

step 2

Click on Network in System Preferences window.
Mac OS 10.5/10.6/10.7 PPTP setup example

step 3

Press + to add new connection.
Mac OS 10.5/10.6/10.7 PPTP setup example

step 4

You should see pop down menu now. Check next step
Mac OS 10.5/10.6/10.7 PPTP setup example

step 5

Under Interface choose VPN option
Mac OS 10.5/10.6/10.7 PPTP setup example

step 6

Under VPN type choose PPTP option
and fill Service Name as SafeVPN (PPTP). That’s not critical – you can choose any name.
Press Create button
Mac OS 10.5/10.6/10.7 PPTP setup example

step 7

Under Server address put your server IP, you can check check correct details in Customer Area
and under Account name put your Username
Mac OS 10.5/10.6/10.7 PPTP setup example

step 8

Click on Authentication settings… button
Mac OS 10.5/10.6/10.7 PPTP setup example

step 9

Under Password put your VPN password.
Press Ok to save details.
Mac OS 10.5/10.6/10.7 PPTP setup example

step 10

Under Encryption choose None option.
Mac OS 10.5/10.6/10.7 PPTP setup example

step 11

Press Advanced button now.
Mac OS 10.5/10.6/10.7 PPTP setup example

step 12

Check the box Send all traffic over VPN connection and click Ok.
Mac OS 10.5/10.6/10.7 PPTP setup example

step 13

Use Apply button to save VPN connection settings.
Mac OS 10.5/10.6/10.7 PPTP setup example

step 14

VPN configured – you’re star!
You can connect VPN using Connect button
Mac OS 10.5/10.6/10.7 PPTP setup example

step 15

Once connected you will see your new VPN IP address and connection status
Mac OS 10.5/10.6/10.7 PPTP setup example

step 16

To disconnect VPN press Disconnect button
It’s pretty simple to use SafeVPN.net connection, use Connect/Disconnect button.
Mac OS 10.5/10.6/10.7 PPTP setup example

Leave a Reply